Summer Starts Here - Save up to 70%
Trailer Brake Controller Installation - 2007 Chrysler 300- Video
Today we are going to be installing Prodigy part number 90185 on a 2007 Chrysler 300. We are also going to be using the brake control wiring kit, part number ETBC7. What we are going to do is go ahead and locate a good position to mount the brake controller. We are inside the cab here, directly below the steering wheel. A good mounting location for the brake controller is typically right to the right of the steering wheel so it is within hands reach of making your adjustments. But before we go ahead and mount it I want to go ahead and locate the brake wire underneath the steering column, right above the brake pedal. This is a wire that we are going to need to tap into which is going to activate the brake controller for us. It is actually located on the brake switch and we are going to look for the wire that actually gets hot when we depress the brake pedal. There is a carpeting piece underneath here that is covering up all the wiring that is above the brake pedal. So the first thing I am going to do is to go ahead and remove that. There are two push pins: one here, and one here, that I need to remove. OK, now that we have got the carpeted piece up and out of the way, we have gone ahead and located the brake switch, which is that white box right there at the top of the brake pedal. If you follow behind that, you will locate the wiring harness that is feeding the brake switch. I went ahead and tested them and I found that the green wire with the white stripe is the wire that we are looking for that is the cold side of the brake switch - the wire that we are looking to tap into with the red wire on the brake controller. So we are going to go ahead and do that now, and then I think we will go ahead and mount the brake controller. more
5/18/2009 10:58:31 AM
Filter Videos
Filter Videos
